Common Multicast Configuration; Configuring A Multicast Mac Address Entry - 3Com WX3000 Series Operation Manual

Unified switches switching engine
Table of Contents

Advertisement

3

Common Multicast Configuration

Common Multicast Configuration

Configuring a Multicast MAC Address Entry

In Layer 2 multicast, the system can add multicast forwarding entries dynamically through a Layer 2
multicast protocol. Alternatively, you can statically bind a port to a multicast MAC address entry by
configuring a multicast MAC address entry manually.
Generally, when receiving a multicast packet for a multicast group not yet registered on the device, the
device will flood the packet within the VLAN to which the port belongs. You can configure a static
multicast MAC address entry to avoid this.
Follow these steps to configure a multicast MAC address entry in system view:
To do...
Enter system view
Create a multicast MAC
address entry
Follow these steps to configure a multicast MAC address entry in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Create a multicast MAC
address entry.
If the multicast MAC address entry to be created already exists, the system gives you a prompt.
If you want to add a port to a multicast MAC address entry created through the mac-address
multicast command, you need to remove the entry first, create this entry again, and then add the
specified port to the forwarding ports of this entry.
You cannot enable link aggregation on a port on which you have configured a multicast MAC
address, and you cannot configure a multicast MAC address on an aggregation port.
You
cannot
IGMP-Snooping-enabled VLAN. You can do that if IGMP Snooping is not enabled in the VLAN.
Use the command...
system-view
mac-address multicast
mac-address interface
interface-list vlan vlan-id
Use the command...
system-view
interface interface-type
interface-number
mac-address multicast
mac-address vlan vlan-id
configure
a
multicast
Required
The mac-address argument must
be a multicast MAC address.
Required
The mac-address argument must
be a multicast MAC address.
MAC
address
starting
3-1
Remarks
Remarks
with
01005e
in
an

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx3024Wx3010Wx3008

Table of Contents