Jitter Test - 3Com WX3000 Series Operation Manual

SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
Http result:
DNS Resolve Time: 0
DNS Resolve Min Time: 0
DNS Resolve Max Time: 0
DNS Resolve Failed Times: 0
DNS Resolve Timeout Times: 0
TCP Connect Time: 73
TCP Connect Min Time: 5
TCP Connect Max Time: 20
TCP Connect Timeout Times: 0
[device-hwping-administrator-http] display hwping history administrator http
HWPing entry(admin administrator, tag http) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.
For an HTTP test, if configuring the destination address as the host name, you must configure the IP
address of the DNS server to resolve the host name into an IP address, which is the destination IP
address of this HTTP test.

Jitter Test

Network requirements
Both the HWPing client and the HWPing server are WX3000 series devices. Perform a HWPing jitter
test between the two devices to test the delay jitter of the UDP packets exchanged between this end
(HWPing client) and the specified destination end (HWPing server), with the port number set to 9000.
Status LastRC
13 1
9 1
3 1
3 1
3 1
2 1
3 1
3 1
2 1
2 1
1-23
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
HTTP Operation Time: 675
HTTP Test Total Time: 748
HTTP Transmission Successful Times: 10
HTTP Transmission Failed Times: 0
HTTP Transmission Timeout Times: 0
HTTP Operation Min Time: 27
HTTP Operation Max Time: 80
Time
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4