I Microphone - Icom IC-2710H Instruction Manual

I Microphone

e r
LOCK CALL
w
VFO MR
q
DTMF-S FUNC
AFC AFC-OFF
1 2
MONI SCAN
PGR CSQL DTMF
4 5
HIGH MID
TONE TSQLS
7 8
DUP DUP+
TONE-1 TONE-2 16KEY LOCK
0
VOL VOL
q UP/DOWN SWITCHES [Y]/[Z]
➥ Push either switch to change the operating frequency,
memory channel, set mode contents, etc. (pgs. 17, 32)
➥ Push and hold either switch to start scanning. (p. 42)
w PTT SWITCH
➥ Push and hold to transmit; release to receive. (p. 25)
➥ Toggles between transmitting and receiving while the
one-touch PTT function is in use. (p. 26)
e VFO SWITCH [VFO(LOCK)]
t
SUB
y
BAND
F-1
u
F-2
i
Mic element
PTT-M MW
3 A
PRIO CLR o
D-OFF
6 B
LOW SET
TSQL T-OFF
9 C
SIMP ENT
MUTE
# D
SQL SQL
PANEL DESCRIPTION
➥ Push to select VFO mode.
➥ Push and hold to toggle the lock function ON and OFF.
r MEMORY SWITCH [MR(CALL)]
➥ Push to select memory mode. (p. 32)
➥ Push and hold to select the call channel. (p. 37)
t ACTIVITY INDICATOR
Lights red while a key is pushed; lights green while the
one-touch PTT function is in use.
y BAND SWITCH
➥ Push to toggle the main band. (p. 15)
➥ Push and hold to turn the sub band access function ON
and OFF. (p. 22)
u FUNCTION SWITCHES [F-1]/[F-2] (p. 74)
Assign your desired key function from the front panel
switches.
• Default settings are VHF and UHF tuning dials to [F-1] and [F-2],
respectively for quick band selection.
i FUNCTION INDICATOR
➥ Lights yellow while [FUNC] is activated—indicates the
secondary function of switches can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad. (p. 51)
o KEYPAD
Used for controlling the transceiver, transmitting a DTMF
encoder, etc. See pgs. 7 and 8 for function details.
1
6