17
OTHER FUNCTIONS
I Auto power-off
The auto power-off function conveniently turns the transceiver
power OFF after a preset time in which no operations are per-
formed. In this way, when you forget to turn the power OFF,
the transceiver automatically turns itself OFF, thereby con-
serving battery power.
The time can be set to 30 min., 1 hr., 2 hr. or turned OFF. The
selected time is retained even when the transceiver is turned
OFF via the auto power-off function. To cancel the function,
select "oF" in step ➃ below.
➀
Push [POWER] to turn power
OFF.
➁
While pushing [
turn power ON to enter initial
set mode.
➂
Push [
SET L] one or
(VOL)
more times until "PoF" appears.
• Pushing [
MONI] reverses the order of selection.
(SQL)
➃
Rotate the left-hand tuning dial to select the desired auto
power-off time or turn the timer OFF ("oF").
• "AO" appears when an auto power-off time is set.
➄
Push [POWER] momentarily to exit initial set mode.
73
INITIAL SET MODE
USING
SET L],
(VOL)
The display shows that the
30 min. timer is selected.
I Cooling fan
setting
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
The display shows that the
cooling fan is set for au-
tomatic operation.
A O
➀
Push power to turn power OFF.
➁
While pushing [
(VOL)
set mode.
➂
Push [
SET L] one or more times until "FAn" appears.
(VOL)
• Pushing [
MONI] reverses the order of selection.
(SQL)
➃
Rotate the left-hand tuning dial to set the cooling fan to au-
tomatic ("At") or continuous ("on").
➄
Push [POWER] momentarily to exit initial set mode.
INITIAL SET MODE
USING
The display shows that the
cooling fan is set for contin-
uous operation.
SET L], turn power ON to enter initial