I Code Channels - Icom IC-2710H Instruction Manual

13
PAGER AND CODE SQUELCH

I Code channels

D Before programming
The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must
be written in the code channels before operation. The trans-
ceiver has separate code channels for each band.
D Code channel assignment
ID OR CODE CHANNEL
GROUP CODE
Your ID code
Other parties'
ID code
Group code
Memory space*
* Code channel P automatically memorizes an ID code when receiv-
ing a pager call. The contents in channel P cannot be changed
manually.
57
"RECEIVE ACCEPT"
NUMBER OR "RECEIVE INHIBIT"
0 "Receive accept" only.
"Receive inhibit" should
1–5 be programmed in each
channel.
"Receive accept" must be
One of 1–5
programmed.
P "Receive inhibit" only.
RECEIVE ACCEPT AND INHIBIT
Code channels 1–5 can store the transmit codes for per-
sonal calls to other individuals and the group codes for
group calls.
The group codes should be programmed as "receive ac-
SKIP
cept" (" " disappears) to receive all calls from group
members.
If transmit codes are not programmed as "receive inhibit,"
the transceiver accepts calls directed to other individuals
and your answer back may confuse other members in your
group—this is not a selective calling system. Therefore,
transmit codes should be programmed as "receive inhibit"
SKIP
(" " appears) so the transceiver rejects calls directed to
other individuals.