I Para-Watch - Icom IC-2710H Instruction Manual

I Para-watch

The IC-2710H can simultaneously receive 2 signals on the
same band, 144 MHz or 430(440) MHz band, using the para-
watch function.
Can be switched
between VHF and
UHF.
[EXAMPLE]
Receiving a VHF signal
➀
Push the desired band's tuning dial to assign the main
band.
➁
Push and hold the main band's tuning dial until "-144-" or
"-430-" (or "-440-" for U.S.A. version) appears to change
the operating band.
➂
Repeat step ➁ again to cancel the function.
NOTE:
• Memory channels are common for the same band.
• Transmitting on the para-watch frequency is possible and
the transmission quality is the same as usual. However,
the opposite band's audio is muted, even when both
bands are reversed.
The para-watch function cannot be activated from
F-1
the regular microphone keys. However, when the
F-2
tuning dial function is assigned to the user-pro-
grammable keys, [F-1] and [F-2], the para-watch
function can be activated via the microphone in
the same manner as described above.
4
BASIC OPERATION
24