Options - Icom IC-2710H Instruction Manual

Dual band fm transceiver

Hide thumbs Also See for IC-2710H:

Service manual (71 pages)

Step-by-step programming manual (2 pages)

Service manual (48 pages)

Table Of Contents

Table of Contents

OPTIONS

Some of the following options may not be available due to

variations in local electrical standards, etc. If you have any

questions regarding options please consult your Icom Dealer.

D Antenna

AH-32 144/430(440) MHz DUAL BAND ANTENNA

Dual band mobile antenna.

Frequency range: 144–148 MHz and 430–450 MHz.

Max. input power: 150 W

AHB-32 TRUNK MOUNT

Trunk mount with a coaxial cable for the AH-32.

D Speakers

SP-7 EXTERNAL SPEAKER

For base station use. Cable length: 1.0 m; 3.3 ft

SP-10 EXTERNAL SPEAKER

Compact design. Cable length: 1.5 m; 4.9 ft

SP-12 EXTERNAL SPEAKER

Slim-type. Cable length: 2.0 m; 6.6 ft

SP-7

SP-10

SP-12

D Separation accessories

OPC-600/601 SEPARATION CABLE

For operation with the front panel detached.

Cable length

OPC-600: 3.5 m; 11.5 ft

MB-58 REMOTE CONTROLLER BRACKET

Mounts the remote controller in a convenient location for op-

eration with the front panel detached from the main body.

MB-65 REMOTE CONTROLLER BRACKET

Mounts the remote controller with MB-58. Adjustable angle

and direction for optimum installation positioning.

OPC-440/647 MIC EXTENSION CABLE

Cable length

OPC-440: 5.0 m; 16.4 ft

OPC-347 DC POWER CABLE

Has a 20 A capacity and a length of 7.0 m (23.0 ft).

OPC-441 SPEAKER EXTENSION CABLE

Cable length: 5.0 m; 16.4 ft.

MB-65

OPC-601: 7.0 m; 23.0 ft

OPC-647: 2.5 m; 8.2 ft.

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the IC-2710H and is the answer not in the manual?

Questions and answers

Bob

January 20, 2025

Set sub-audible tone to 67 Hz. How do I save it so that it transmits?

1 comments:

Mr. Anderson

February 4, 2025

To save the sub-audible tone setting to 67 Hz on the Icom IC-2710H for transmission, follow these steps:

1. Enter the desired frequency and ensure the radio is in VFO mode.
2. Access the tone setting by pressing the appropriate button (e.g., [SET] or similar).
3. Navigate to the sub-audible tone frequency setting using the tuning dial.
4. Select 67.0 Hz as the tone frequency.
5. Exit the tone setting mode by pressing [ECLR] or the tuning dial.
6. To save the tone setting permanently, overwrite the memory channel with the updated settings.

Note: If you do not overwrite the memory channel, the tone setting will be cleared when switching to memory/call mode.

This answer is automatically generated