I Transferring Memory Contents - Icom IC-2710H Instruction Manual

6
MEMORY OPERATION
I Transferring memory
contents
This function transfers a memory channel's contents into a VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency, etc.
Push
DUP – T
➀
Push the desired band's tuning dial.
➁
Select the memory channel to be transferred:
➥ Select memory mode by pushing the selected band's [M/CALL]
once or twice ("!" appears).
➥ Rotate the selected band's tuning dial to select the memory
channel.
➂
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
pushing momentarily.
➃
Push and hold [
push was used in the previous step.
35
S.MW MW
for 1 sec.
DUP – T
MW
+
FUNC A
CLR
MW] instead of
(S.MW)
MW] to transfer when a momentary
(S.MW)
Ä
Push [BAND] to select the desired band, if nec-
MW
essary.
Å
Select the memory channel to be transferred:
➥ Push [MR] to select memory mode.
➥ Push [Y] or [Z] to select the memory channel; or
push [GENT] then push the desired memory chan-
nel number (2 digits) to select the memory channel
directly.
Ç
Push [FUNC] then [EMW] momentarily, then
push [Y] or [Z] to select another memory chan-
nel to transfer.
• To transfer to the VFO, push [FUNC] then push and
instead of pushing momentarily.
hold [EMW]
É
Push [FUNC] then [EMW] for 1 sec. to transfer
when a momentary push was used in the pre-
vious step.