I Code Programming - Icom IC-2710H Instruction Manual

I Code programming

➀
Push the desired band's tuning dial.
• Each band has separate code channels.
➁
Push [DTMF] 2 times to turn the pager function ON.
• "P" appears in place of the 100 MHz digit.
➂
Push [ SET] to select the code channel setting display.
(VOL)
➃
Rotate the selected band's tuning dial to select the desired
code channel, 0–5.
• Code channel P cannot be used for programming.
➄
Push [ )MONI] or [
(SQL (VOL)
programmed.
➅
Rotate the selected band's tuning dial to set the digit.
➆
Repeat ➄ and ➅ until the last digit is programmed.
➇
Push [DTMF] to set the code channel for "receive inhibit"
or "receive accept."
• When "receive inhibit" is set, "
• Code channel 0 cannot be set as "receive inhibit."
• See p. 57 for "receive inhibit" or "receive accept" details.
➈
Push the selected band's tuning dial to exit the setting dis-
play.
1 5 9
SET] to select the digit to be
SKIP
" appears.
The display shows that
VHF code channel 0
(your ID code) is pro-
grammed for 248.
PAGER AND CODE SQUELCH
Ä
Push [BAND] to select the desired band, if nec-
SET
essary.
B
• Each band has separate code channels.
Å
Push [FUNC] then [➃PGR] to turn the pager
function ON.
• "P" appears in place of the 100 MHz digit.
Ç
Push [FSET] to select the code channel setting
display.
É
Push [Y] or [Z] to select and set the desired
code channel, 0–5.
• Code channel P cannot be used for programming.
Ñ
Push the numeral keys to enter the desired
3-digit code.
• Digits are automatically stored once the 3rd digit has
been entered.
Ö
Push [FSET] to set the code channel for "re-
ceive inhibit" or "receive accept."
• When "receive inhibit" is set, "
• Code channel 0 cannot be set as "receive inhibit."
• See p. 57 for "receive inhibit" or "receive accept" de-
tails.
Ü
Push [ECLR] to exit the setting display.
13
SKIP
" appears.
58