I Subaudible Tones - Icom IC-2710H Instruction Manual

5
REPEATER OPERATION

I Subaudible tones

T
1 5 9
Separate setting for each band
➀
Push the desired band's tuning dial.
➁
Select the mode/channel you wish to set the subaudible
tone frequency to, such as VFO mode or memory/call
channel.
➂
Push [SET] one or more times until "T" appears and
flashes as shown above.
• Push [MONI] to reverse the order of selection.
• Cancel the DTMF memory encoder or optional pager/code
squelch function in advance. (pgs. 49, 59, 62)
➃
Rotate the selected band's tuning dial to select and set the
desired frequency.
➄
Push the desired band's tuning dial to exit set mode.
NOTE: The subaudible tone frequency can be set in a
memory channel temporarily. However, the set contents
are cleared once the memory/call mode is selected. To
store the tone frequency permanently, overwrite the chan-
nel information.
29
SET MODE
USING
The display shows that an
88.5 Hz subaudible tone fre-
quency is set.
Ä
Push [BAND] to select the desired band, if nec-
SET
essary.
B
Å
Set the mode/channel you wish to set the sub-
audible tone frequency to, such as VFO mode,
memory/call channel or scratch pad memory.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
Ç
Push [FSET] one or more times until "T" ap-
pears and flashes as shown at left.
• Pushing [GENT] reverses the order of selection.
• Cancel the DTMF memory encoder or optional
pager/code squelch function in advance. (pgs. 49,
59, 62)
É
Push [Y] or [Z] to select and set the desired
frequency.
• Pushing and holding [Y] or [Z] changes the fre-
quency continuously.
Ñ
Push [ECLR] to exit set mode.
• Subaudible tone frequency list
67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2
69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9
71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8
74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6
77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5
(unit: Hz)
203.5 229.1
206.5 233.6
210.7 241.8
218.1 250.3
225.7 254.1