Icom IC-2710H Instruction Manual page 74
Dual band fm transceiver
Hide thumbs
Also See for IC-2710H:
- Service manual (71 pages) ,
- Step-by-step programming manual (2 pages) ,
- Service manual (48 pages)
Table of Contents
Advertisement
16
WIRELESS OPERATION
D Keypad
KEY
AFC
Calls up a call channel.
CALL
1
AFC-OFF
Selects memory mode.
MR
2
PTT-M
Selects VFO mode.
VFO
3
PGR
Selects high output power.
HIGH
4
C-SQL
Selects mid output power.
MID
5
DTMF
Selects low output power.
LOW
6
TONE
Selects – duplex.
DUP–
7
T-SQLS
Selects + duplex.
DUP +
8
T-SQL
Selects simplex.
SIMP
9
PRIO
Mutes both bands' audio signals.
MUTE
0
69
FUNCTION
SECONDARY FUNCTION (After
No secondary function.
No secondary function.
Turns the one-touch PTT function ON
and OFF.
Turns the optional pager function ON.
Turns the optional code squelch function
ON.
Turns the DTMF memory function ON.
Turns the subaudible tone encoder ON.
Turns the optional pocket beep function
ON.
Turns the optional tone squelch function
ON.
Starts and stops a priority watch.
OTHER FUNCTIONS
FUNC
)
DEMO
ENT
D
• After
:
Input the appropriate digit
for frequency or memory
channel selection.
DTMF
KEY
• After
:
Transmit the appropriate
DTMF code.
DTMF
MEMO
• After
:
Transmit the appropriate
DTMF memory contents.
[1] to [8] can be used for
DTMF memory.
- Quick Links:
- Setting a Frequency
- I Crossband Full Duplex
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-2710H and is the answer not in the manual?
Questions and answers
Set sub-audible tone to 67 Hz. How do I save it so that it transmits?
To save the sub-audible tone setting to 67 Hz on the Icom IC-2710H for transmission, follow these steps:
1. Enter the desired frequency and ensure the radio is in VFO mode.
2. Access the tone setting by pressing the appropriate button (e.g., [SET] or similar).
3. Navigate to the sub-audible tone frequency setting using the tuning dial.
4. Select 67.0 Hz as the tone frequency.
5. Exit the tone setting mode by pressing [ECLR] or the tuning dial.
6. To save the tone setting permanently, overwrite the memory channel with the updated settings.
Note: If you do not overwrite the memory channel, the tone setting will be cleared when switching to memory/call mode.
This answer is automatically generated