Panel Description - Icom IC-2710H Instruction Manual
Dual band fm transceiver
Hide thumbs
Also See for IC-2710H:
- Service manual (71 pages) ,
- Step-by-step programming manual (2 pages) ,
- Service manual (48 pages)
Table of Contents
Advertisement
KEY
FUNCTION
• Clears a digit before entry.
• Cancels the scan, priority watch, pager,
MW
code squelch or DTMF memory function.
A
CLR
(pgs. 42, 48, 51, 59, 62)
Enters set mode and advances the set
D-OFF
mode selection order.
B
SET
• Sets the keypad for numeral input.
T-OFF
C
ENT
• Decreases the set mode selection order
after entering set mode.
Increases the squelch level.
MUTE
• The [SQL] control on the front panel has prior-
D
SQL
ity when rotated.
Decreases the squelch level.
16KEY LOCK
• The [SQL] control on the front panel has prior-
#
SQL
ity when rotated.
Decreases the audio output.
TONE-1
M
VOL
SECONDARY FUNCTION (after
(p. 19)
• Writes the VFO contents into the memory
channel or call channel.
• Advances the memory channel number
when continuously pushed after program-
ming is completed.
Turns the pager, code squelch, DTMF mem-
(p. 82)
ory or DTMF remote function OFF.
Turns the subaudible tone encoder, pocket
(p. 19)
beep or tone squelch OFF. (pgs. 28, 53, 54)
(p. 82)
(p. 20)
Mutes both band's audio signals.
• Mute function is released when any operation is
performed.
(p. 20)
Locks the digit keys on the keypad (including
M
the A–D, # and
keys.
(p. 20) Sends a 1750 Hz tone signal for 1 sec.
PANEL DESCRIPTION
OTHER FUNCTIONS
FUNC
)
(pgs. 34, 38)
(p. 34)
(pgs. 59, 62, 63)
DTMF-S
After
Transmit the appropriate
DTMF code.
(p. 21)
(p. 16)
(p. 28)
1
:
(p. 51)
8
- Quick Links:
- Setting a Frequency
- I Crossband Full Duplex
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-2710H and is the answer not in the manual?
Questions and answers
Set sub-audible tone to 67 Hz. How do I save it so that it transmits?
To save the sub-audible tone setting to 67 Hz on the Icom IC-2710H for transmission, follow these steps:
1. Enter the desired frequency and ensure the radio is in VFO mode.
2. Access the tone setting by pressing the appropriate button (e.g., [SET] or similar).
3. Navigate to the sub-audible tone frequency setting using the tuning dial.
4. Select 67.0 Hz as the tone frequency.
5. Exit the tone setting mode by pressing [ECLR] or the tuning dial.
6. To save the tone setting permanently, overwrite the memory channel with the updated settings.
Note: If you do not overwrite the memory channel, the tone setting will be cleared when switching to memory/call mode.
This answer is automatically generated