I Using The Keypad; Setting A Frequency - Icom IC-2710H Instruction Manual

Dual band fm transceiver
Hide thumbs Also See for IC-2710H:
Table of Contents

Advertisement

3

SETTING A FREQUENCY

I Using the keypad

The frequency can be directly set via numeral
ENT
keys on the microphone.
C
Ä
Push [BAND] to set the main band, if necessary.
Å
Push [VFO] to select VFO mode.
Ç
Push [ENT] to activate the keypad for digit input.
[EXAMPLE]: Setting the frequency to 145.360 MHz.
then
BAND
VFO
[EXAMPLE]: Setting the frequency to 446.325 MHz. (When the 25 kHz tuning step is selected in UHF.)
then
BAND
VFO
19
C
ENT
4
4
C
ENT
HIGH
HIGH
LOW
É
Push 5 keys to input a frequency.
• When a digit is mistakenly input, push [ENT] to clear the input,
then input from the 1st digit.
• Pushing [CLR] clears input digits and retrieves the frequency.
Ñ
Push [Y] or [Z] to make adjustments below the 10 kHz
digit, if desired.
1
4
5
3
MONI
HIGH
MID
PRIO
6
3
0
PRIO
VOL
6
LOW

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-2710H and is the answer not in the manual?

Questions and answers

Bob
January 20, 2025

Set sub-audible tone to 67 Hz. How do I save it so that it transmits?

1 comments:
Mr. Anderson
February 4, 2025

To save the sub-audible tone setting to 67 Hz on the Icom IC-2710H for transmission, follow these steps:

1. Enter the desired frequency and ensure the radio is in VFO mode.
2. Access the tone setting by pressing the appropriate button (e.g., [SET] or similar).
3. Navigate to the sub-audible tone frequency setting using the tuning dial.
4. Select 67.0 Hz as the tone frequency.
5. Exit the tone setting mode by pressing [ECLR] or the tuning dial.
6. To save the tone setting permanently, overwrite the memory channel with the updated settings.

Note: If you do not overwrite the memory channel, the tone setting will be cleared when switching to memory/call mode.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents