Using The Microphone - Icom IC-28H Instruction Manual

© USING THE MICROPHONE
NOTE: The microphone SCAN
SWITCH must be ON.
Ш MEMORY PROGRAMMING
Example: Store 144.950MHz in me-
mory channel 10.
1) Select memory channel 10.
4) Push WRITE SWITCH.
Select MEMORY mode.
Ш MEMORY CHANNEL TO
VFO TRANSFERS
Example: Transfer the contents of
memory channel 15 to the
VFO.
1) Select memory channel 15.
2) Push the VFO side of the VFO/MR SWITCH.
WRITE SWITCH until the 3 tones are heard.
— 16 –