I Transferring Scratch Pad Memory Contents - Icom IC-2710H Instruction Manual

Ä
Push [BAND] to select the desired band, if nec-
CALL
essary.
Å
Push and hold [
channel.
Ç
Push [Z] one or more times to select a duplex
scratch pad memory.
• Once entering a scratch pad memory, [Y] can also
be used for selection.
É
Push [MR] or [VFO] to exit the scratch pad
memory.
I Transferring scratch pad
memory contents
Transferring scratch pad memory contents to the VFO is done
similarly to transferring regular memory/call channel contents.
Push for 1 sec.
then
FUNC
CALL] to select the call
(MR)
S.MW MW
MW
A
CLR
SCRATCH PAD MEMORY
➀
Push the desired band's tuning dial.
➁
Select the call channel by pushing the selected band's
[M/CALL] once or twice.
• A large "C" appears.
➂
Rotate the selected band's tuning dial to select the desired
scratch pad memory.
• One of "L1"–"L3" appears.
➃
Push [ MW] momentarily.
(S.MW)
• " " flashes to indicate VFO as the transferring channel.
➄
Rotate the tuning dial to select the desired memory chan-
nel if required.
➅
Push and hold [ MW] to transfer.
(S.MW)
Ä
Push [BAND] to select the desired band, if nec-
MW
essary.
Å
Push [ CALL] for 1 sec. to select the call
(MR)
channel.
Ç
Push [Z] one or more times to select the de-
sired scratch pad memory.
É
Push [FUNC] then [EMW] momentarily.
• " " flashes to indicate VFO as the transferring
channel.
Ñ
Push [Y] or [Z] to select the desired memory
channel if required.
Ö
Push [FUNC] then [EMW] for 1 sec. to transfer.
8
40