Network And Fabric Configuration - Qlogic SANbox 5000 Series Interface Manual

The switch network configuration consists of the following:
The network discovery method determines how the switch acquires its IP address.
The IP address can come from the IP address that resides on the switch or from a
server. The switch supports network discovery from the following server types:
This section describes the following network configuration tasks:
59183-02 A

Network and Fabric Configuration

Network discovery method
IP address
Subnet mask
IP gateway address
Bootstrap Protocol (BootP)
Reverse Address Resolution Protocol (RARP)
Dynamic Host Configuration Protocol (DHCP)
Displaying Name Server Information
Displaying the Ethernet Network Configuration
Configuring the Ethernet Port
Verifying a Switch in the Network
Section 4
4-1