Honda Civic Service Manual page 1684

Power Mirrors
Power Mirror Test
1. Pry out the cover panel (see section 20).
Terminalside of
male terminals
*: Canada '99 - 00 models
Disconnect the 8P connector from the power mirror.
Check actuator operation by connecting power and
ground according to the tables.
Dofogger Test:
4. Check for continuity between the No. 3 and No. 4
terminals of the 8P connector.
There should be continuity.
COVER
L___r"'ry1
Position
6 7 I
TILT UP
o
@
TILT DOWN
@
SWING LEFT
o
@
SWING RIGHT
@
2 3 - 2 1 2
Mirror Actuator Replacement
(Donnelly Typel
'1. Remove
the power mirror from the door {see sec-
tion 20). and disconnect the 8P connector.
2 . R e m o v e t h e m i r r o r b a s e c o v e r f r o m t h e m i r r o r
housing.
MIRROR HOLDER
Remove the mirror holder from the mirror housing.
Gently pull it out by hand.
Remove the three screws from the actuator and the
two screws from the bracket at the base of the
assemory.
BRACKET
5. Remove the bracket from the housinq.
4 .
MIRROR HOUSING