Interlock System
Park Pin Switch Test
1, Remove the front console (see section 2Ol.
Disconnect the 4P connector from the park pin
switch.
Check for continuity between the No. 3 and No. 4
terminals with:
- the shift lever any position other than
E, or
- the push button pushed in E.
There should be continuity.
Check for continuity between the No. 3 and No. 4
terminals with the shift lever in E and the push but-
ton released. There should be no continuiw. lf nec-
essary, replace the park pin switch.
NOTE: Park pin switch 4p connector No. 1 and No.2
terminals are lor Ay'T gear position console light.
refer to the circuit diagram on page 23-1S0.
23-14A