Honda Civic Service Manual page 1791

From page 21 50
Check for an open in the SRS main ha.ness:
1. Disconnect the battery negative cable, then disconnect
the positive cable, and wait for three mrnrrtes
2. Disconnect the driver's airbag 2P connector from the
cable reel2P connector (see page 24 11)
3. Disconnect the SRS main harness 18P connector from
the SRS unit. Do not disconnect the special tool (2 0)
from the SRS main harness 2P connector'
4- Check resistance between the No. 10 terminal and No. 14
terminal of the SRS main harness 18P connector' There
should be apProx 2 0 3.0 0
ls the resislance as specified?
NO
YES
Poor contact at the SRS m.in harness 18P connector;
check the connector'
. ll the connector is OK, substituto a known_good SRS
unh. and rccheck,
.lf the probl€m is still present, replace th€ SRS main
narness,
Ooen or incretsed resistance in the SRS m.in harness;
replac6 the harness.
SRS UNIT
SRS MAIN
18P CONNECTOR
. J
l 0
24-51