Interior Lights
Spotlights Test
1. Turn the spotlight switch OFF.
2.
Pry off the lens.
3.
Remove the two screws and the housing.
4.
Disconnect the 1P connector from the housing.
5.
Check for continuity between the terminals in each
switch position according to the table.
\
Terminal
t*'*-__\
2
3
4
OFF
o-{
e,
//:\
--o
--o
\:,/
ON
o-
-*i
@
/a\
-_o
--o
\:.,/
2 3 - 1 8 6
Trunk Light Test
1. Open the trunk light cover from the housing.
2.
Pry out the light assembly.
3.
Disconnect the 2P connector from the housing,
4.
Make sure that the bulb is OK. Check for continuity
between the No. 1 (+) and No.2 (-) terminals.
EULB {.')
*1 3.4 W: USA, Canada-oroduced
5 W: Japan-produced