Adding Or Modifying A Group Profile; Figure 29 Default User Groups - Nortel BCM 3.7 Manual

128 Managing access passwords

Adding or modifying a group profile

The access privileges inherent in the various predefined group profiles control user access within
the Unified Manager interface. The administration group maps to administrator privileges on the
Business Communications Manager host system. The other group profiles map to
non-administration groups.
To add or modify the profile for a group, follow these steps:
1
Select Management, User Manager.
The User Profile screen appears showing the current user profile information.
2
Click the User Group List tab, to view the existing groups.

Figure 29 Default user groups

3
Add or change a user group:
• If you are adding a new group: from the Configuration menu, select Add User Group.
• If you are editing an existing group: select the user group name on the list, then from the
Configuration menu, select Modify User Group.
N0008589 3.3
Total access
CDR requests only
Data setup access only
Dial-up access (read-only)
Read only
Telephony configurations access