Table of Contents
Advertisement
BRI loops:
"Identifying BRI T-loops (ETSI, QSIG)" on page 282
Display (Type: QSIG trunks only)" on page
VoIP trunks: The field for allowing outgoing name display for VoIP trunks, affecting all trunks,
is under Services, General settings, IP Trunking.
Programming Business name display
Nortel Networks recommends that you use a blank space for the last character of the Business
name to act as a separator between the Business name and telephone name.
Note, that if you leave this field blank, no name appears.
To program the Business Name:
1
Click on the keys beside Services, Telephony services.
2
Click on General settings.
3
In the Business name box, type the Business name you want to appear on receiving
telephones (a maximum of eight characters).
4
Other areas that you must programmed include:
•
The OLI number. Refer to
•
Under Telco Features, the Auto Called ID must be set to Yes. Refer to
features" on page
Using alpha tagging for name display
You can configure your system to display a caller name for incoming lines that provide
number-only CLID, such as target lines and analog CLID lines.
Note: Lines that provide name and number CLID, such as PRI lines, use that name for display,
rather than the alpha tagging feature.
You use a combination of fields within the Unified Manager to set up this feature.
•
To determine the name to display, you add a system speed dial for the number, entering a
display name. Refer to
•
You can increase the default number of system speed dials from 70 to 255 if you want to
provide an extensive CLID list. Refer to table entry:
468.
•
To determine how many digits of the dialed number and the system speed dial must match
before a name is displayed, you set the Clid match length setting. Refer to table entry:
Match Length
•
In order for the telephone to display the name, it must have CLID name display (table entry:
Caller ID set
on page 410) enabled for the assigned line, and First display must be set to
Name (table entry:
"Configuring line access" on page
456.
"Configuring system speed dial numbers" on page
on page 468.
First display
on page 456).
283). Can be set for T-loop and BRI-QSIG trunks.
Maximum System Speed Dials
Programming Operations Guide
Network name display
(see the field
"Send Name
405.
"Configuring telco
482.
on page
463
Clid
Advertisement
Table of Contents
