This section includes the following information:
•
"Adding a restriction filter" on page 357
•
"Notes about restriction filters" on page 358
•
"Adding overrides to restrictions" on page 360
•
"Restriction filter examples" on page 361
The following figure shows the Restriction Filters headings.
Figure 111 Restriction Filters headings
Restriction Filters
Filter 00-99
Restrictions
Restriction 01
Digits
Overrides
Override 001
Digits
Adding a restriction filter
Follow these steps to add new restriction filters:
1
Click on the keys beside Services, Telephony Services.
2
Click on Restrictions.
3
Click the Add button located above the navigation tree.
The Add Restrictions dialog appears.
Figure 112 Adding restriction filters
4
Enter the digits you want to restrict.
5
Click Save.
The new restriction is added to the button of the restrictions list for that filter.
6
If you want to add numbers that will override the restrictions, refer to
restrictions".
Defining restriction filters
"Adding overrides to
Programming Operations Guide
357