Table 187 V.90 Modem Access Parameters - Nortel BCM 3.7 Manual

694 V.90 modem dial up
10 Configure the V.90 Modem Access Parameters according to the information in the following
table.

Table 187 V.90 modem access parameters

Attribute
Authentication
Two Way Authentication
User Name
User Password
11 Press the TAB key to save the settings.
N0008589 3.3
Description
Lets you select the authentication type for the link. The options are AllowClearText or
EncryptedOnly.
AllowClearText: The CHAP is used first and if the receiving end of the link declines, PAP
is used to authenticate the link.
EncryptedOnly: Only encrypted authentication such as CHAP is used on this interface
during PPP authentication process.
Lets you enable or disable link authentication in both directions.
The default value is Disabled.
Lets you define a user name that the link uses to authenticate itself when dialing out to
another router.
Lets you define a password that the link uses to authenticate itself when dialing out to
another router.
Note: The password you choose must conform to the password policy used for your
Business Communications Manager system. For more information about the password
policy, refer to "Setting password policy" on page 134.