Configuring Onn Blocking Service Codes; Figure 167 Onn Blocking Parameters; Table 104 Onn Blocking Settings - Nortel BCM 3.7 Manual

Programming note: Ensure that users who have access to this feature have telephones with valid
OLI numbers. Refer to

Configuring ONN blocking service codes

Follow these steps to configure an ONN setting:
1 Click on the keys beside Services, Telephony services, and Telco features.
2 Click on ONN blocking.

Figure 167 ONN blocking parameters

3 The following table explains the possible choices for ONN blocking.

Table 104 ONN blocking settings

Field Values
Tone F78(0 to 9, *, #)
Pulse F78(0 to 9, *, #)
BRI F78(0 to 9, *, #)
Note: When ONN is active, set and set/line restrictions are ignored. The CO call back feature is
also disabled until the feature is cancelled.
"Assigning line access" on page
Description
For analog trunks, enter a digit or character to determine what code
the user will enter to activate this service.
For digital trunks, except BRI, enter a digit or character to determine
what code the user will enter to activate this service.
For BRI trunks, enter a digit or character to determine what code the
user will enter to activate this service.
Setting system telco features
406.
Programming Operations Guide
487