Table of Contents
Advertisement
388
Creating telephone records with the Add Users Wizard
7
After you configure the DNs, review each DN record and determine if you need to change any
of the other settings. Refer to the detailed programming sections to identify each field under
each heading.
Note: Not all DN records have the same programming options. For example, ISDN sets do not
have a Button Programming option
What you need to know about the user
Before you fill out the Add Users Wizard, photocopy this list and fill out the information for each
telephone or group of telephones. If you filled out the telephony forms in the Programming
Records, use the information in these forms to answer the questions.
Table 74 Add Users wizard information
Screen 1, Add Users
Refer to
"Identifying the telephone (General heading)" on page
What type of telephone records are you programming:
•
What type of telephones are you configuring?
•
How many telephones do you want to configure?
Select:
— a single DN
— a range of DNs (hold down <SHIFT> key)
— several DNs scattered across the list
(hold down <CNTRL> key.
•
Do you want to use this wizard to define settings or use a
preconfigured template?
If from Local DN Record Template . . .
•
Which template do you want to choose?
If from Remote DN Record Template . . .
•
What is the IP address for the remote server?
•
What is the access Port for the remote server?
•
What is the path to the file on the remote system
•
Do you want to add this remote repository?
Refer to
"Using remote templates" on page
N0008589 3.3
403.
(DN type)
(Set model)
(Choose one or more DNs)
(Use settings)
Defined in this wizard
From a Local DN Record Template
From a Remote DN Record Template
(Local DN Record Template)
Template <number> - <template name>
(Remote IP_Address)
(Remote Port (default: 8600)
(Remote Path (default:/)
396.
(Refresh button)
Advertisement
Table of Contents
