General heading
The General heading allows you to assign a name to the analog device and to view the
physical port number assigned to the DN.
1
From Unified Manager, click on the keys beside Services, Telephony Services, System DNs,
and Active set DNs.
Figure 222 Active set DN screen example
2
Click on the key beside Set DNs.
3
Click on the DN record (DN XXXX) for an analog device.
4
Click on the General heading.
Figure 223 General screen example
5
Use the table below to assign a name to the analog device.
Table 285 General record fields
Attribute
Values
Name
<up to seven
alphanumeric characters>
Model
Other
Configuring an analog device DN record
Description
This setting shows the DN number for the analog device.
Use this setting to provide a more specific description of the device, such
as the last name of the user or the device location.
This is a read-only setting when the analog device is installed on the
system.
Other represents analog devices.
Programming Operations Guide
879