Configuring Buttons From The Dn Record; Table 87 Button Programming Choices - Nortel BCM 3.7 Manual

Configuring buttons from the DN record

Follow these steps to program the buttons on a telephone.
1
If you are not already in the DN record, click the key beside telephone DN where you want to
program button features.
2
Click the key beside User preferences.
3
Click the key beside Button programming. The list of available buttons appears.
4 Click the button number that you want to program.
5
Use the information in the following table to configure button preferences.

Table 87 Button programming choices

Setting
Type
Value field:
Feature
Internal autodial
External autodial
External #
External autodial
Note: If the button defaults to Blank, you need to select an option, and then press the <TAB> key.
Values
Blank
Feature
Internal autodial
External autodial
<feature name>
<Internal DN>
Use prime line
Pool
Use routing table
Use line
<dialing codes plus dialout
string>
Programming telephone buttons
Description
Choose the type of feature that you want to program on the
telephone buttons.
Blank means that nothing is programmed on the button.
Example: new KIM modules have all blank buttons when they
are first installed.
Note: You can change any telephone button that is initially set
to Blank by selecting an option, and then pressing the TAB
key.
Use the arrow to choose the feature you want to program on
the button.
Enter the DN number for the internal telephone you want the
telephone to dial by pressing this button.
Choose the route the telephone will dial through.
Prime line: the prime line assigned to the telephone
Pool X: one of the pools assigned to the telephone
Routing table: enter the destination code with the external
phone number
Use line X: one of the lines assigned to the telephone
Enter the complete dial sequence for the external call. This
sequence will depend on what you chose for the route in the
Value field.
Programming Operations Guide
433