586
Programming Hunt group lines
Programming Hunt group lines
Multiple lines can be assigned to Hunt groups. However, a line can only exist in one Hunt group.
When you assign lines to Hunt groups, you must ensure that there is no interruptions to the call
before the Hunt group DN handles the call. One of the settings that you need to check, is the
designated prime set. This must be set to None. This prevents calls coming on that line from
transferring to a prime set before the Hunt group can handle the call.
For more information about programming line settings, refer to
page
248.
Programming note: Lines assigned to line buttons on individual telephones take precedence over
the lines assigned to Hunt group buttons. Therefore, we recommend that you do not assign lines to
individual telephone DN records for telephones that are part of a Hunt group.
N0008589 3.3
DN 225 moved to Member 001
"Assigning Trunk/line data" on