Nortel BCM 3.7 Manual page 386

386 Editing DN Record Templates
Table 73 Edit DN Record Template information (Continued)
• Do you want to determine button settings for the
telephones?
Refer to "Programming telephone buttons" on page
If No,
— If Set model is set to Multiple, the button programming for the selected DNs does not
change.
— If Set model on both the Wizard and the system telephone records (DNs) you selected in the
Wizard are the same, there will be no change to existing button programming.
— If Set model on the Wizard and Set model in the DNs on the system are different, the Wizard
will overwrite the button programming for the telephone record with the default settings for
the model specified in the Wizard. The exception to this is if a telephone with a different
model identity is already plugged into the system, in which case the wizard will not change
the button settings for that telephone.
If Yes,
— The button display for the telephone appears. Lines
and intercom buttons will be indicated as read-only
and cannot be changed. Refer to
programming in the wizard" on page 394
"Default button assignments" on page
— When you apply this template, all current settings
for the specified DNs are overwritten by the wizard
entries.
— For External Autodial numbers and features that
use a dial-out, you will need to know which line,
line pool, route, or prime line the telephone will use
when the number is dialed.
N0008589 3.3
(Perform Button Programming)
No/Yes
432.
(Button XX)
Blank
Internal Autodial
"Changing button
External Autodial
and
Feature
435.