Configuring Dn Records, An Overview - Nortel BCM 3.7 Manual

Chapter 13

Configuring DN records, an overview

This section provides an overview about the process for programming the records of the
telephones and equipment attached to the station modules on the Business Communications
Manager. Refer also to the process map on the next page
process" on page
For a detailed description about what DNs are, and what the different categories of DNs in the
navigation menu mean, refer to
contains a DN registration heading, which lists the DNs which are, or which can be, registered
to the system
Task overview: To set up each telephone or device attached to your system:
• Determine which DNs will be assigned to the telephones and devices.
("DN mapping for digital telephones" on page
• Use the Wizards to configure telephones
("Configuring DNs using the Wizards" on page
OR
Configure each telephone record individually
399).
• Determine the call display and log options.
• If you have optional voice mail active on your set, you will also see the active phone number
for each telephone.
• If your attendants have 7316E digital phones with KIM modules that are assigned as CAP
stations, you need to assign these systems under
The new BTS Doorphone, which uses the 7324 model name, has separate installation and
configuration guides.
IP telephones require the programming described in this section, but they also have specific IP
configuration parameters, which are described in the IP Telephony Configuration Guide.
366).
Defining the System DN headings
("DN Registration headings" on page
("Voice Mail settings" on page
("Understanding the configuration
on page 370. System DNs also
375).
367)
381)
("Configuring DNs for system devices" on page
("Configuring telco features" on page
457).
"Setting up CAP stations" on page
Programming Operations Guide
365
456)
446.