Configuring For Expired Alarms; Figure 213 Expired Alarms Fields; Table 140 Alarm Data Settings - Nortel BCM 3.7 Manual

Configuring for expired alarms

The Expired alarms setting allows you to program the system to notify a specific telephone
whenever a Hospitality alarm expires. This occurs when the maximum number of alarm attempts
has occurred and the alarm is cancelled without the user responding. You can also choose to allow
a caller to hear a tone when an alarm expires.
Follow these steps to set expired alarms.
1
Click the keys beside Services, Telephony Services, Hospitality, and Alarm data.
2
Click Expired alarms.
The Expired alarms fields appears in the right field.

Figure 213 Expired alarms fields

3 The following table describes the fields on the Alarm data screen.

Table 140 Alarm data settings

Field Values
Notify set None/DN: <telephone DN> Enter a telephone DN if you want to notify a specific telephone
Use tone Y, N
Description
when an alarm expires.
Choose whether you want the user to hear a tone when the
alarm expires.
Programming Alarm data
Programming Operations Guide
599