Configuring Devices; Creating An Interface Group Configuration; Table 245 Qos Advanced Parameters; Table 246 Qos Interface Group Table Parameters - Nortel BCM 3.7 Manual

Software
Table of Contents

Advertisement

802
Implementing Quality of Service (QoS)
5
Click the network adapter you want to modify.
6
On the Configuration menu, click Modify Adapter Water Mark.
The Advanced property sheet appears.
7
Configure the Advanced parameters according to the following table.

Table 245 QoS Advanced parameters

Setting
Definition
Adapter Name
Shows the name of the network adapter you are modifying.
High Water Mark
Enter the High Water Mark for this network adapter.
For LAN adapters, you can enter a value from 1 to 37.
For WAN and Dialup adapters, you can enter a value from 1 to 5.
Low Water Mark
Enter the Low Water Mark for this network adapter.
For LAN adapters, you can enter a value from 1 to 37.
For WAN and Dialup adapters, you can enter a value from 1 to 5.
Note: The value for the Low Water Mark must be lower than the value for the High Water Mark.
8
Click the Save button.
9
Repeat steps 5 to 8 for each network adapter you want to modify.

Configuring Devices

The Devices heading provides access to the Interface Group Table screen, the Interface Queue
Table screen, and the DSCP Assignment Table screen. You can configure the Interface Group
Table screen. The other two screens provide read-only information.
You view existing interface group configurations, or create or modify an interface group if you
want a port (or ports) associated with a role combination for the purpose of assigning the same
QoS policy to all interfaces in the group.

Creating an interface group configuration

To create an interface group configuration:
1
On the navigation tree, click the Services key and click the Policy Management key.
2
Click the QoS key and click the Devices heading.
The Interface Group Table screen appears.
3
On the Configuration menu, click Add Interface Group Entry.
The Interface Group Table property sheet appears.
4
Configure the Interface Group Table parameters according to the following table.

Table 246 QoS Interface Group Table parameters

Attribute
Group Name
N0008589 3.3
Description
Enter the name for the interface group.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Business communications manager 3.7

Table of Contents