Table of Contents
Advertisement
What you need to know to fill out a template
Before you fill out a template, look at the following list and determine what entries you want to
include in the template. Photocopy the list and fill it out for each template you want to create.
Detailed explanations of the fields can be found elsewhere in this chapter.
Remember that some telephones do not allow some of these features or may have specific
configuration requirements. Refer to the relevant sections under
system devices" on page
Table 73 Edit DN Record Template information
Screen 1, Edit Template
•
Do you want to edit an existing template?
Screen 2, Template Name
•
Find a name that provides a descriptive clue as to what the
template contains.
•
Do you want this template to be used for a specific model of
telephone?
Use the Multiple listing (default) if the template is meant to
apply to more than one type of telephone.
Screen 3, CallPilot Voice Messaging*
*These settings are only for those systems actually running the CallPilot application. Connection to
remote voice mail systems is set under Telco Features and Target lines. Refer also to
centralized voice mail" on page
•
Do you want to add a new voicemail mailbox for the set?
If yes . . .
•
Do you want this telephone in the Auto Attendant
directory?
•
How do you want the telephone to dial out to voicemail?
If Pool, you will be prompted to choose a Line pool.
If Line, you will be prompted to choose a line.
Screen 4, Line Assignment
Refer to
"Configuring line access" on page
•
Do you want the Prime line for your telephones to be the
intercom button?
•
How many intercom buttons do you want to assign to the
telephone.
•
Which line pools do you want this telephone to have access
to for outgoing calls?
•
Which lines do you want this telephone to have access to?
399.
563.
405.
Editing DN Record Templates
"Configuring DNs for
(Template <number> - <name>)
(Template Name)
(Set model)
"Configuring
No, Yes
(In directory?): No, Yes
Pool, Line, Route, None
(Prime line)
None, Pool (A to O), I/C (intercom),
Line: <line number>
(Intercom Keys)
0 to 8
(Pool)
(enter line pool name) Add
(Line)
(enter line number)
Programming Operations Guide
383
Add
Advertisement
Table of Contents
