Cdp-Specific Programming - Nortel BCM 3.7 Manual

540 Using SL-1 with MCDN to network with a Meridian system

CDP-specific programming

Business Communications Manager CDP programming
• Private Dialing Plan: Private
Access Code <unique code>.
• Private DN length
• PNI
• Program the DestCodes for the
other nodes
M1 CDP programming
• Distant Steering Codes
• Check RLI (Route Line Index)
• Program new CDP value to
route
N0008589 3.3
Type=CDP
<system DN length>
<number assigned from M1
(1-128)>
use Steering code as part of dial string
Overlay 87, LD 87
REQ: PRT
CUST: 0
FEAT: CDP
TYPE: DSC (Distant Steering Code)
DSC: press enter (lists all DSC programmed)
Overlay 86, LD 86
REQ: PRT
CUST: 0
FEAT: RLB
PLI: press enter (displays all the RLIs)
Overlay 87, LD 87
REQ: CHG
CUST: 0
FEAT: CDP
TYPE: DSP
DSC: enter number (enter common Business Communications
Manager system number, for example if DNs are 4XX, enter 4)
RLI: enter the RLI that corresponds to the route
LD 16, RDB - PNI in M1
programming
LD 15 - Net - PNI in M1
programming set to PNI of switch