Network Name Display; Figure 157 General Settings Headings And Fields; Table 95 Call Features/Interface List - Nortel BCM 3.7 Manual

Silent monitor
The following figure shows the headings discussed in this section in bold.

Figure 157 General Settings headings and fields

System speed dial
General settings
Business name
Feature settings
SWCA control
Call log space
Nortel IP terminals
IP trunking
Timers
Direct Dial
CAP/KIM assignment
Dialing plan
Access codes
Remote access packages
COS passwords
DN lengths
CbC limits

Network name display

Business Communications Manager displays the name of the calling party, when available, on
both Private or Public ISDN PRI interfaces. The displayed name can include the Receiving Calling
Name, Receiving Redirected Name, and/or Receiving Connected Name. Refer to
sending calling party name" on page
If only a number is available for CLI on an incoming call, you can program a system speed dial in
such a way that a name displays when that number calls in. Refer to
display" on page
The outgoing name display consists of the Business name and the telephone name. Refer to
"Programming Business name display" on page
The following table provides a list of the name/number display features and the list of ISDN
interfaces that support each feature.

Table 95 Call features/interface list

Feature
Receiving Calling Name
Receiving Redirected Name
"Setting up Silent Monitoring" on page 589 (Chapter 23, "Configuring
Hunt groups)
462.
463.
Interface
DMS
NI-2-2 PRI Custom PRI
Supported Supported
Supported
General settings (continued)
Release reasons
Network Services
Silent monitor
Access codes
Remote access packages
COS passwords
DN lengths
CbC limits
Release reasons
Network Services
Silent monitor
Hunt groups
Companion
Hospitality
Telco features
Voice message center numbers
ONN blocking
463.
SL-1
(MCDN) NI-2 BRI
Supported Supported
Supported Supported
Network name display
"Receiving and
"Using alpha tagging for name
ETSI Euro
(PRI/BRI) ETSI QSIG
Supported
Programming Operations Guide
461