Determining Line Assignments; Applying Target Lines (Incoming Calls Only); Figure 128 Assigning Characteristics To Each Line - Nortel BCM 3.7 Manual

Determining line assignments

The line assignment setting allows you to assign physical trunks and target lines to each telephone.
Target lines are incoming only. Other lines can be used to both make and answer calls if they are
configured to do so.
Doorphone note: Before installing doorphone hardware, ensure that you delete any lines, line
pools, or answer DNs assigned to the DN record you plan to use for the doorphone.
This section includes the following information:
• "Applying target lines (incoming calls only)" on page 409
• "Assigning lines to telephones" on page 410
• "Notes about assigning lines to telephones" on page 411

Figure 128 Assigning characteristics to each line

Applying target lines (incoming calls only)

You can assign and remove target lines (lines 241 to 492) in the same way that you assign other
lines, under Line access. You can also use the Add Users Wizard to define target lines. Refer to
"Creating telephone records with the Add Users Wizard" on page
Refer also to "Notes about assigning lines to telephones" on page
+
*
+
This field appears for target lines only.
* This fields are only available for target lines and analog lines
that provide CLID (GASM).
Determining line assignments
387.
411.
Programming Operations Guide
409