Table of Contents
Advertisement
366
Understanding the configuration process
Understanding the configuration process
The following process map provides an over-all view of how to set up telephone configurations.
Figure 116 Process map: Configuring DNs for system devices
Lines, station modules
and base stations are
installed, as required.
You have determined
the DN ranges that
you are configuring.
Do you
have a
DN template
defined?
Yes
Use the Add Users Wizard to
define the DN records. Refer to
Creating telephone records with
the Add Users Wizard
Tweak each DN record, including
setting up display and log options,
special button programming, and
restrictions, as required. Refer to
Configuring DNs for system
devices
on page 399
Note: References in this document to terminal, set, and telephone all refer to telephones that are
compatible with the Business Communications Manager system.
N0008589 3.3
DN number ranges depend on where station modules are
set, on the type of telephones, and on the vintage of your
system. IP telephones use DNs within the digital range. If
they are set to automatically choose a DN, the system
chooses DNs beyond the station module range.
Refer to
and
devices" on page
No
Use Edit DN Record Template Wizard
if you are adding a number of devices
that have the same configurations.
Refer to
on page 381.
on page 387
telephones
connected to
the system?
Yes
"DN mapping for digital telephones" on page 367
"DN mapping for ISDN and legacy wireless handset
370.
Editing DN Record Templates
Are the
Refer to the applicable
No
installation guide, and
/devices
install the devices.
Test the devices
Advertisement
Table of Contents
