Table of Contents
Advertisement
698
ISDN dial up
10 Press the TAB key to save the settings.
11 Click the ISDN Dial-Out User tab.
The ISDN Dial-out User screen appears.
12 On the Configuration menu, click Modify ISDN Dial-out User.
13 Configure the ISDN Dial-out User parameters using the information in the following table.
Table 191 ISDN dial-out user parameters
Attribute
Description
User Name
Enter the user name that the link must use to authenticate itself when dialing out to another
router.
Password
Enter the password that the link must use to authenticate itself when dialing out to another router.
Note: The password you choose must conform to the password policy used for your Business
Communications Manager system. For more information about the password policy, refer to
"Setting password policy" on page
14 Click the Save button.
15 Click the ISDN Channel Characteristics tab.
The ISDN Channel Characteristics screen appears.
Configuring the ISDN channel characteristics
To add an ISDN channel to the ISDN Channel Characteristics list
1
On the Configuration menu, click Add ISDN Channel.
The ISDN Channel Characteristics screen appears.
2
Configure the ISDN Channel Characteristic according to the information in the following
table.
Table 192 ISDN channel characteristics
Attribute
Description
Row (R#)
Identifies the number of the item in the ISDN channel list.
Port
Select one of the ISDN ports. There are 16 ISDN ports available, named ISDN1 to ISDN16.
Phone1
Enter the primary phone number to use to make an ISDN connection.
If needed, include area codes and all necessary digits to dial an external number. The phone
number must contain only numerical digits only (no alphabetical or other characters are
allowed).
Phone2
Enter an alternate phone number to use to make the ISDN connection.
Include all required area codes and all necessary digits to dial an external number. The phone
number must contain numerical digits only (no alphabetical or other characters are allowed).
If Phone1 dialing fails, and you have specified a number for Phone2, Business
Communications Manager will attempt to dial Phone2.
Exception note: If you have two phone numbers for two different data centers with two distinct
IP subnets, you cannot use a local assigned IP address. Instead, use the remote assigned IP
option with the correct NetLink Manager setup to route the calls properly.
N0008589 3.3
134.
Advertisement
Table of Contents
