What you need to know
Use the following chart to gather the information you need to make the data resource changes that
you require. Not all of these fields will appear if your system does not support the specified
hardware. Enter only the information that is changing.
Screen 1, Network settings
•
What is the new name that you want to give your system?
LAN 1
•
What is the new IP address for the first LAN card?
•
What is the new Subnet Mask for the first LAN card?
•
What is the WINS server address?
LAN 2
•
What is the new IP address for the second LAN card?
•
What is the new Subnet Mask for the second LAN card?
•
What is the WINS server address?
WAN 1
•
What is the new IP address for the WAN card?
•
What is the new Subnet Mask for the WAN card?
•
Port (read-only)
•
What is the new Link Protocol for the WAN card?
WAN 2
•
What is the new IP address for the WAN card?
•
What is the new SubNet Mask for the WAN card?
•
Port (read-only)
•
What is the new Link Protocol for the WAN card?
Default Next Hop Router
•
What is the new IP address for the next router or link on the network? (Next Hop on Primary Link)
DNS
•
What is the domain name of the DNS server?
•
What is the IP address for the primary server?
•
What is the IP address for the secondary server?
Note: If you do not enter a primary server, the system will use the
secondary server entry as the primary entry.
Using the Network Update Wizard
System Name:
IP Address
Subnet Mask
WINS Server
IP Address
Subnet Mask
WINS Server
IP Address
Subnet Mask
Port: T1
Link Protocol
IP Address
Subnet Mask
Port: V.35
Link Protocol
IP Domain
Primary Server
Secondary Server
Programming Operations Guide
639