Table of Contents
Advertisement
Chapter 29
Configuring the LAN resources
Business Communications Manager is equipped with an Ethernet/802.3 network interface card
which supports the IEEE 802.3 Ethernet frame format. The Ethernet connection uses Carrier Sense
Multiple Access with Collision Detection (CSMA/CD) to manage the access to the physical
media.
This chapter includes information about:
•
"Viewing the LAN resources" on page 667
•
"Configuring LAN resources" on page 668
The Business Communications Manager Ethernet interface card supports the following features:
•
100 BASE T with RJ-45 connector
•
10 / 100 Auto Sense
•
full duplex
•
fast LAN-to-LAN routing (when using more than one LAN card)
•
LAN traffic smoothing
•
multiple IP addresses
Viewing the LAN resources
Unified Manager shows all available LAN resources. If your Business Communications Manager
base unit is equipped with two LAN interface cards, Unified Manager displays all available LAN
resources and names each one (LAN1, LAN2).
To view the available LAN resources:
1
On the navigation tree, click the Resources key and click the LAN heading.
The LAN Parameters screen appears.
2
Click the Resources tab.
The Resources screen appears.
Programming Operations Guide
667
Advertisement
Table of Contents
