Table of Contents
Advertisement
426
Setting intrusion controls
Setting intrusion controls
If the break-in feature is allowed on any private network MCDN lines (PRI SL-1) assigned to the
telephone, you need to define the level of intrusion for each telephone. This determines if the user
can use the feature, and to what degree. This heading is found under Capabilities.
Follow these steps to set Intrusion levels.
1
If you are not already in the DN record, click on the key beside the telephone DN to which you
want to set an intrusion level.
2
Click on the key beside Capabilities.
3
Click Intrusion.
4
In the Protect lvl field, choose an access level.
There are four levels of access:
• None
• Low
• Med(ium)
• High
N0008589 3.3
feature is turned off, user cannot break in on any calls
user can only break into calls on other telephones with low level protection
user can break into calls on other telephones with low and medium-level
protection
user can break into calls on all other telephones with this feature
Advertisement
Table of Contents
