Sending All Traffic From Local Accessible Networks Through The Ipsec Tunnel; Table 236 Ipsec Remote Accessible Network Parameters; Table 237 Remote Accessible Networks Used To Route All Traffic Through - Nortel BCM 3.7 Manual

778 IPSec
6 Configure the Remote Accessible Network parameters according to the following table.

Table 236 IPSec Remote Accessible Network parameters

Attribute Description
Network Number Allows you to specify the Network identifier.
(R#)
The Network Number uniquely identifies a Remote Accessible Network. The value for this
setting must follow certain conventions. You must type the prefix 'R' followed by a unique
number identifying the Remote Accessible Network. For example, 'R2' is a valid name. If you
specify an existing Network number, you receive an error message. If you use non-sequential
numbers the system automatically reassigns sequential numbers. The Network identifier does
not have any significance, other than uniquely identifying an entry.
The maximum number of Remote Accessible Networks you can add is 16.
IP Address Allows you to specify the IP addresses of IPSec gateways that you can connect to using this
tunnel.
Enter the IP address in the dotted format.
IP Address Mask Allows you to specify the subnet mask of IPSec gateways that you can connect to using this
tunnel.
Enter the Subnet Mask in the dotted format.
7 Click the Save button.
Note: Different tunnels cannot have the same Remote Accessible Networks.

Sending all traffic from Local Accessible Networks through the IPSec tunnel

If you want to send all traffic from the Local Accessible Networks through the IPSec tunnel, add
the eight Remote Accessible Networks in the table below to the tunnel.
You can also generate these local and remote accessible networks by choosing Yes for the Send
All Traffic through this tunnel option when creating or modifying a Branch Office account.
Table 237 Remote Accessible Networks used to route all traffic through the IPSec tunnel
Network Number
R1
R2
R3
R4
R5
R6
R7
R8
N0008589 3.3
IP Address
1.0.0.0
2.0.0.0
4.0.0.0
8.0.0.0
16.0.0.0
32.0.0.0
64.0.0.0
128.0.0.0
IP Mask
255.0.0.0
254.0.0.0
252.0.0.0
248.0.0.0
240.0.0.0
224.0.0.0
192.0.0.0
128.0.0.0