Nortel BCM 3.7 Manual page 928

928 S
Server Message Block
See SMB.
service control password
This is the password that you enter when you want to start or change routing and
restriction service settings.
Service modes
See services.
Service Profile Identifiers
See SPIDs.
services
You can define service schedules for ringing services, restriction services and routing
services. This allows you to control call access a different times of the day and for
different days of the week.
set
This book often uses this term in reference to telephones or telephony devices.
Set lock
This feature allows you to limit the number of features that are available at a telephone.
Full set lock allows very few changes or features, Partial set lock allows more changes and
features, and No set lock allows any change or any feature. Assign the Set lock under
DNXX, Restrictions, Set Restrictions. (Services, Telephony Services, System DNs)
set relocation
This feature maintains the personal and system programming on digital telephones that get
moved to a different jack on the same system, providing no other telephone is plugged into
the original jack first. This feature is set under Feature Settings. (Services, Telephony
Services, General Settings)
signaling channel
Signaling channels are the communication channels used to send control signals to and
from the MSC. Signaling channels are also known as D-channels.
silent monitoring
This is the term used to define the monitoring feature that allows supervisors to monitor
Hunt group or Call Center calls. This guide describes the Hunt group monitor features
("Monitoring Hunt groups" on page
Center documentation.
Simple Network Management Protocol
See SNMP.
N0008589 3.3
589). Call Center monitoring is described in the Call