Table of Contents
Advertisement
184
Universal T1 WAN (UTWAN)
Table 25 LCP Options (Continued)
Attribute
Description
LQ Reporting
Enter the maximum time in 100th of seconds between the transmission of packets.
Period
Possible values are 100 to 60000.
The default value is 1000.
Retry Timer
Enter the number of seconds waited before retransmitting LCP Configure-Request packets.
Timeout Value
Possible value are 30 to 180.
The default value is 60.
5
Press the TAB key to save your settings.
Configuring the IPCP Options
1
On the navigation tree, click the Resources key and click the UTWAN key.
2
Click the UTWAN1 heading.
The Summary screen appears.
3
Click the IPCP Options tab.
The IPCP Options screen appears.
4
Configure the IPCP Options according to the information in the following table.
Table 26 IPCP Options
Attribute
Description
IPCP Timeout
Enter the number of seconds waited before retransmitting Configure-Request and
Value
Terminate-Request packets.
Possible values are 0 to 65000 seconds.
The default value is 3 seconds.
IPComp Protocol
Enter the IPComp Protocol.
Possible values are 0 to 65000.
The default value is 0.
IPCP Max
Enter the maximum number of Terminate-Request packets sent.
Terminate
Possible values are 0 to 65000.
Request
The default value is 2.
IPCP Max
Enter the maximum number of Configure-Request packets sent.
Configure
Possible values are 0 to 65000.
Request
The default value is 10.
IPCP Max
Enter the maximum number of Configure-NAK packets sent.
Configure Nak
Possible values are 0 to 65000.
The default value is 5.
5
Press the TAB key to save your settings.
N0008589 3.3
Advertisement
Table of Contents
