7316 Button Defaults; Figure 140 7316 Telephone Button Assignment - Nortel BCM 3.7 Manual

7316 button defaults

Button mapping for the 7316 digital phone is unique. Although the button is patterned after the
7310, the 7316 does not have a second level on its upper button group. Because of this, the
numbering for the 7316 is not consecutive. Refer to the diagrams below.
Internal autodial numbers are assigned to buttons 11, 13, 15, 17, 19, and 21 on the main button
group. Programmed external line buttons descend down the lower left buttons, starting with button
01. When more than five external lines are programmed, assignment continues on the lower right
buttons, starting at button 06.
Important note: The 7316E digital phone buttons are mapped differently than the 7316.
Therefore, if you replace a 7316 telephone with a 7316E, the button programming will revert to the
default settings for the 7316E, losing any keys programmed by the user at the telephone. Also,
settings that are copied from one telephone to the other may be in a different location on the new
telephone. This is consistent with how the system behaves if you switch any telephone model for a
different model on the same connector.
The following figure shows the default button number assignments on the 7316 digital phone.
7316 upper buttons (PBX and DID) default button settings
Autodial to 227
Autodial to 228
Autodial to 229
Autodial to 230

Figure 140 7316 telephone button assignment

11
13
15
01
02
03
04
05
Btn #
23
25
27
29
17
19
21
06
07
08
09
10
Default button assignments
Btn #
31 Autodial to 231
33 Autodial to 232
24 Autodial to 239
26 Autodial to 240
7316 lower button defaults
Btn # PBX DID
11 Autodial 221
13 Autodial 222
15 Autodial 223
01 DND Target Line
02 Transfer
03 Call Forward
04 Pick-Up
05 Page-General
Btn # PBX
17 Autodial to 224
19 Autodial to 225
21 Autodial to 226
06 Conference
07 Last No. Redial
08 Intercom
09 Intercom
10 Handsfree
Programming Operations Guide
437
DID