Adding an Output Filter for a Firewall Filter Interface
Before you can specify a rule order, you must add filters.
The maximum number of output filter rules you can add is 32.
1
Click the Output Filter Rules' Setting tab.
The Output Filter Rules' Settings screen appears.
2
On the Configuration menu, click Add Output Filter Rule.
3
Configure the Output Filter Rule settings. These setting are described in the table in
an Input Filter for a Firewall Filter Interface" on page
4
Click the Save button.
Modifying an Output Filter for a Firewall Filter Interface
1
Click the Output Filter Rules' Setting tab.
The Output Filter Rules' Settings screen appears.
2
Click the Output Filter you want to modify.
3
On the Configuration menu, click Modify Output Filter Rule.
4
Modify the Output Filter attributes.
5
Click the Save button.
Deleting an Output Filter for a Firewall Filter Interface
1
Click the Output Filter Rules' Setting tab.
The Output Filter Rules' Settings screen appears.
2
Click the Output Filter you want to delete.
3
On the Configuration menu, click Delete Output Filter Rule.
A message appears that asks you to confirm the deletion.
4
Click the Yes button.
Configuring IP Firewall Filters for an interface
823.
Programming Operations Guide
827
"Adding