Table of Contents
Advertisement
696
ISDN dial up
6
In the Confirm Password box, type the password again.
7
In the Channel list, select the channel the connection must use.
8
Click Save to save your settings.
The newly created ISDN interface appears under ISDN.
Configuring an ISDN interface
To configure an ISDN interface:
1
On the navigation tree, click the Resources key and click the Dial Up key.
2
Click the ISDN key and click on the interface you want to configure.
The ISDN Summary screen appears.
3
Configure the ISDN Summary settings according to the information in the following table.
Table 188 ISDN summary settings
Attribute
Description
Interface
Shows the name of the ISDN interface selected.
IPAddress
Enter the IP address of the ISDN interface when it connects. You can set a fixed IP address for
the dial-up interface or you can select RemoteAssigned to indicate that Business
Communications Manager must obtain an IP address from the remote end. The address obtained
depends on the RAS server to which Business Communications Manager connects.
The default value is RemoteAssigned.
Callback note: If you want to use secure callback with this interface, enter an IP address. For
information about setting up callback, refer to
Description
Enter a description of the interface.
Version
Show the version number of the interface.
Status
Lets you view and set the ISDN interface resource status. Possible values are:
Connect: The ISDN interface is currently connected. Also used to force the interface to initiate a
connection.
Disconnect: The ISDN interface is not currently connected.
Enabled: The ISDN interface is enabled for use.
Disabled: The ISDN interface is disabled.
Tip
You cannot select an ISDN interface that is set to "RemoteAssigned" as the Local
Gateway IP for the VoIP Gateway.
4
Press the TAB key to save the settings.
5
Click the ISDN Link Parameters tab.
The ISDN Link Parameters screen appears.
N0008589 3.3
"Managing access passwords" on page
121.
Advertisement
Table of Contents
