Table of Contents
Advertisement
110
Changing system identification parameters
Changing system identification parameters
There are some identification parameters you may choose to change after the Quick Start Wizard
has set up your system.
Warning: Running the Quick Start Wizard a second time will delete any changes you
entered to the default telephony settings, including any telephony data.
The following sections provide information about changing your system identification parameters
through the Unified Manager.
•
"Identifying your system and software version" on page 110
•
"Changing the Business Communications Manager time and date" on page 111
•
"Changing the system domain" on page 112
•
"Changing the CallPilot region" on page 113
Identifying your system and software version
The System heading has a tab that allows you to find or change the name assigned to your system
and to view the current version of BCM software that is running on your system.
This section provides information about:
•
"Changing the system name" on page 110
•
"Viewing the system software version" on page 111
Changing the system name
The system name identifies the Business Communications Manager system on the network.
To change the system name:
1
On the navigation tree, click on System.
The Item screen appears.
2
Click the System Name box.
3
Enter the new system name.
4
Press the Tab key to save your change.
After you change the System Name, restart the Business Communications Manager system. If you
change the System Name and do not restart the Business Communications Manager system,
Scheduled tasks will not run.
Note: The System Name is the NetBIOS name of Business Communications Manager.
N0008589 3.3
Advertisement
Table of Contents
