Removing a Bridge Multicast Group
To delete a bridge multicast group:
1 Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply.
The selected bridge multicast group is removed, and the device is updated.
Bridge Multicast Forwarding
Use the Bridge Multicast Forwarding page to enable attaching ports or LAGs
to a switch that is attached to a neighboring Multicast switch. Once IGMP
Snooping is enabled, multicast packets are forwarded to the appropriate port
or VLAN.
To display the Bridge Multicast Forwarding page, click Switching →
Multicast Support → Bridge Multicast Forwarding in the navigation menu.
Figure 25-4. Bridge Multicast Forwarding
724
Configuring L2 Multicast Features